Hydraulic Removable Gooseneck Trailers


Gooseneck Commercial Trailer

We created our hydraulic removable gooseneck trailers especially for the safe and efficient front-loading of wheeled and tracked equipment. Every aspect of design and construction of these trailers allows you to maximize your capacity and handle the demands of challenging load conditions with ease - including heavy-duty construction, five-position gooseneck height controls, and fixed 2-axle through 4-axle configurations that meet all weight and load requirements from 35-65T capacity.

Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series

Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.
Image of Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series.

SpecificationsSchematicReference MaterialFeatures

Hydraulic Removable Gooseneck 3 Axle Trailers - 55T Extreme Series

Print
KS AbbreviationKSHRG
Legacy NameKSHRG-3-55T Extreme
Capacity110,000 lbs in 12’, 120,000 lbs in 14’ with 4 axles in line (2 axle booster available). GAWR & tire rating determine legal loads.
Overall nominal dimensions8’ 6” wide X 53’ length. Gooseneck 13’ 3”, main deck 26’, and rear deck 15’ 6”.
Additional options available, please contact Kalyn Siebert sales for more information.
Gooseneck/NeckAdjustable 5 position ride height with Kalyn Siebert “Posi-Latch”. Proprietary Kalyn Siebert castings provide higher strength at lower rate.
Neck LugsLugs on Gooseneck for Future Flip on Gooseneck – To Accept a 24” Flip Neck
Swing Clearance108"
King Pin2"
Setting15"
HydraulicsPTO powered as standard (15 GPM, 2800 PSI), two 4” x 10” main & two 4”X 10” lift arm cylinders.13HP Honda Power Pack Available
Load space, nominal:26'
Rear Deck15' 6"
Main Deck Height, loaded20"
Ground Clearance6"
BeamsFour beam design, 130,000-psi yield flanges and 80,000 psi yield web. All 4 beams are the same height.
Crossmembers8” I–Beams on 24” centers.
Floor1 ¾” Apitong with bridge clips and carriage bolts on every other crossmember. Center not floored.
Outriggers13 pair swing/removable, one pair hook-on heavy duty at front.
D-rings10 pair (bent) on siderail, 4 pair (bent) on rear, 2 pair (bent) on gooseneck. Double key hole slots - one on each bolster and rear of deck.
Tool TrayExpanded metal tool tray at front of lower deck, approximately 6’ long.
Boom TroughFirst two crossmembers at rear lowered, no metal rear boom trough tray.
RampsNo front ramps or bridge to rear deck ramps as standard. 10 ¾” drop from top of tapered ramp to ground. Other configurations optional
SuspensionRidewell Air Ride, 60” spread, Last axle has air bag lift
Air ControlsAutomatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
AxlesThree axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb nominal capacity.
Hubs10 stud, hub piloted, long studs, steel hub.
DrumsCast drum
SealsOil
Brakes16½” X 7” Air.
ABSNone
Slack AdjustersAutomatic slack adjusters.
WheelsSteel disc wheels, 8 1/4 X 22 1/2
TiresOEM, 255/70R22.5, 16PR (Low Profile) radial tires.
Mud FlapsBlack anti-spray with Kalyn Siebert logo.
Rear LugsIncluded for 2 axle booster
Under RideProtection Included
Finishing (Paint & trim)Shot blasted prior to paint. Epoxy primer and Black (standard) polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed.
Lights & ElectricalLED-sealed beam with mid turn signal, 12 volt. & way plug. Third tail has strobe light with toggle switch
Conspicuity TapeDiscontinuous on sides.
ManualOne operator manual per order will be provided. Parts manual available as option.
Warranty5 year prorated frame warranty. 3 year prorated paint warranty. 1 year warranty on remainder of trailer.
Weight22,280 lbs + 3% tolerance. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
CommentsMultiple deck insert lengths available for the 55T Extreme and 65T Models. Contact Kalyn Siebert Sales for additional information.

Click to view Schematic PDF.

Hydraulic Removable Gooseneck - Feature Sheet

The Kalyn Siebert Hydraulic Detachable neck is available in Commercial and Extreme models with optional flip neck attachments and additional axles.

Download
View
VersaMAXX™ Low-Profile Bus and Large Vehicle Retriever

The VersaMAXX™ trailer features a 100,000 lb capacity and an adjustable hydraulic removable gooseneck (HRG), along with two 20,000 lb capacity winches with wireless remotes that make single-operator loading possible. Designed to meet the demands of low approach angles in loading and providing a low deck height to accommodate taller vehicles, the new VersaMAXX™ offers a low 22-inch deck height while still providing six inches of ground clearance.

Download
View