Hydraulic Sliding Axle

Kalyn Siebert Sliding Axle trailers are the right choice for towing low-clearance construction equipment, containers, agricultural equipment, or just about anything you can imagine. A low 7-degree approach angle and a 15K or 20K neck-mounted winch make dragging damaged or disabled equipment onto the deck routine. Options, like dock levelers, 6-function remote controls, 20HP power pack, bulkheads and work lights allow these sliders to be as versatile as you need them to be.

Sliding Axle Tilt Deck 2 Axle 35T 48'

Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48
Image of Sliding Axle Tilt Deck 2 Axle 35T 48

SpecificationsSchematicReference MaterialFeatures

Sliding Axle Tilt Deck 2 Axle 35T 48'

Print
KS AbbreviationKHSA
Legacy NameKHSA-2-35
Capacity70,000 lbs distributed in 48’ 0”. 50,000 lbs concentrated in 10’ 0”.GAWR & tire rating determine legal loads
Overall nominal dimensions8’ 6” wide X 48’ nominal length.
Additional options available, please contact Kalyn Siebert sales for more information.
Load Angle7 Degrees
Dump Angle16 Degrees
Swing Clearance86"
King Pin2"
Setting18"
5th Wheel Height48"
Winch20,000 lb capacity planetary hydraulic winch located at front center of upper deck. Winch includes 100’ of 5/8” wire rope and shackle. Roller, 4” X 18”, centered at front of lower deck.
HydraulicsPTO or 20 HP Honda Power Pack option. PTO Connection at front center, 15 GPM @ 2800 PSI. Two lift cylinders, 6” bore diameter with restrictors on lift cylinder retraction side. Slide cylinders are single stage with 3½” bore diameter piggybacked for axle
Main Deck37' 4"
Upper Deck10' 8"
Main Deck Height, loaded38"
BeamsMinimum 100,000 psi flanges with 80,000 psi yield web, 14” deep main rails and 15” deep side rails.
Crossmembers4” junior I beams on 9” centers.
Floor1 5/16” Apitong with screws on every third crossmember.
SliderV-grooved center roller to provide self-centering. Two rollers per side with greasable bearings. Slide pads on top of slider. Slider includes flex track to enclose air, electrical and hydraulic.
Rear Special FeaturesTie down holes in top flange, outer beam both sides on approximately 36” centers. Double tie down holes in center plate, lower deck on approximately 36” centers. Six chain holes across rear approach plate.
SuspensionRidewell Air Ride, manual dump included, 50” spread.
AxlesTwo axles, OEM, 5” round, 5/8” wall, tapered spindles, 25,000 lb nominal capacity, 71” track.
DrumsCast Drum
SealsOil
Brakes12¼” X 7½” Air. Parking brakes on both axles.
Slack AdjustersAutomatic
WheelsSteel disc wheels, 6 3/4 X 17 1/2
TiresOEM, 235/70R17.5, 16PR (Low Profile) radial tires.
Mud FlapsBlack anti-spray with Kalyn Siebert logo.
Lights & ElectricalLED-sealed beam, 12 volt. 7-way plug.
Conspicuity TapeDiscontinuous on sides.
ManualOne operator manual per order will be provided. Parts manual available as option.
Warranty5 year prorated frame warranty. 3 year prorated paint warranty. 1 year warranty on remainder of trailer.
Weight18,700 lbs + 3%. For trailers other than standard specification, weight and dimensional drawing will be provided by plant after order is received and accepted.
Additional Included OptionsTwo function wireless remote for winch. System is air over hydraulics.
CommentsImages may include non-standard options

Click to view Schematic PDF.

Sliding Axle - Feature Sheet

Available in 35 and 53 ton capacities, the Kalyn Hydraulic sliding axle has options such as all function wireless remote control, Honda Power pack with diverter to PTO, and many more key standard features.